News
News
Product
Contact Us
  • Add: 12,Victory Road,Development Zone,
  • Jiangning District,Nanjing City,
  • Jiangsu Province,China
  • Tel: +86-025-5212 1028
  • Fax: +86-025-5212 4208
  • E-mail: sales@nj3a.com
  • Website: www.nanjingsanai.com
News
Several Solutions To Solve The Deviation Of Belt Scale
author:admin    Released:2014-08-02 11:05:46

What is the deviation of belt scale,what scheme can solve the deviation of belt scale,we sum up some points here and share with you.

 

The deviation of belt scale is the phenomenon that the adhesive tape centerline deviates the conveying frame centerline in no-load operation or during the weighing,it is also the phenomenon that belt scale can not completely avoid.Once the belt occurs the deviation condition,then belt scale can not normally precise metering the materials,when it is severe belt scale will not run properly.When faced with such a situation,the staff should do careful inspection well,find the problems,then solve the problem,and the device will be able to operate normally.

 

1、When installing the centerline is not straight,there will be the deviation of belt scale,so it should remain the centerline vertical;

 

2、If the materials feeding point is not in the middle of the belt,there will be a load on the belt once plus deviation.This situation should be adjusted accordingly;

 

3、The roller of is not level will cause the deviation of belt scale,if the installation is not be careful,leading not in level,it should be transferred immediately;

 

4、When installing the roller group axis and the adhesive tape centerline are not vertical will often cause the deviation of belt scale.Where the belt deviates,then move the roller to the direction of the belt;

 

5、The surface of belt roller surface sticks the bonding materials,and makes the roller become the conical surface,will deviate to the side of the tape.This is caused by scattering the materials,it should be taken to prevent this phenomenon and often clean.