1、wind and climate

Because weighing error depends on wind speed,rain,snow,and the impact of the external environment,so the belt weigh scale should be installed away from the effects of wind and the external environment,as required it should be installed indoors,if it must be installed outdoors,it must be equipped with wind and rain protection facilities.

All belt scale systems from the factory,no matter what purpose they have,they all have high accuracy and reliability.Although the application and installation of these systems available to determine the performance and accuracy of the overall system,but if according to the following criteria,the highest performance of belt scale systems are enable to play.Does not each installed belt scale must comply with all the conditions,but more emphasis on the performance of its work,the more important of these conditions,the key lies in the proper use and installation of the belt scale system.

2、Conveyor Bracket

In the design of the weighing system,the amount of deflection should be taken into account,which are the deflection of load sensor,the deflection of weighing frame and the weighing bridge system,and the deflection of the conveyor support structure,it is very important that these deflection should not be too large,in the manufacture of the scale,the deflection of the load sensor,weighing frame and weighing bridge system were controlled,only the deflection of conveyor support structure is a variable amount,therefore,supporting the scales and weighing before and after the four groups of roller conveyor stringers should has sufficient rigidity and support to meet the requirements.If necessary,increasing the support.The relative deflection of +4 To -4 rollers is no more than 0.4mm,at the site of installation of scales,there should be no telescopic conveyors,fittings or stringer splicing.

The impact factors of accurate measurement of belt scale are in many aspects,so when using the scale, requiring maintenance operations management personnel frequent maintenance,testing,in order to maintain a certain degree of measurement accuracy.