We should do the maintainable work conscientiously:the essential measures to ensure the accuracy of belt weigh scale is to do the maintainable work conscientiously.

The reasons that belt weigh scale becomes measuring instruments,not only the belt is in motion,mainly due to the flow of material to be measured in the measurement process is not in a stable state,but in a constant state of change,the measuring of instantaneous flow rate is main link throughout the belt weigh scale measurement.In a total amount to be measured is measured after taking the instantaneous flow rate through the integral of the time obtained.Thus the dynamic characteristic of the instantaneous flow is very important technical indicators.

Belt weigh scale can be roughly divided into process monitoring scales,batching scales(which is also called quantitative feeder),measuring scales and trade settlement scales.Process monitoring scales are mainly used for monitoring the process parameters,and they are less critical on the measurement accuracy;batching scales are mainly used for dosing or feed ratio,and they have certain requirements at batching accuracy and measurement accuracy;measuring scales are used for the enterprises to measure important raw materials or internal economic accounting,so they have the highest requirements of measurement accuracy.

Thus,the intended use of belt weigh scale will largely determine its accuracy requirement,before selecting,it need to put forward the exact accuracy requirements.After the above introduction,it is easy to see,belt weigh scale is with the functional requirements and more features.

In addition,it is paramount to keep belt weigher cleaning,because it is fatal if some impurities or dust once through the air inlet into belt weigher.Most parts of belt weigher are very precise,so if so if there are impurities into them,they will occur friction,or even damaged,or stick the operating belt weigher,all these are likely to occur.So we should always keep the surface of belt weigher clean,and clean the workplace after using.