What Serious Consequences Will Have If Belt Weigh Scale Installs Improperly

author：admin    Released：2014-05-14 10:14:08

When installing the weighing system such as belt weigh scale,not only to consider the wind,sun,rain and other weather factors,but also to consider the magnetic field,with or without corrosive gases,conveyor belts inclination,etc.If you can not follow the correct requirements to install belt weigh scale,there may be a variety of problems in our future work.There are some common problems due to the improper installation of belt weigh scale below:

( 1 ) Overload: The weighing system failure phenomenon is similar to the signal disconnected,then the weight can not be displayed,after lighten the load back to normal,can be avoided by proper use of weight control.

( 2 ) Do not pay attention to environmental factors when installing,it may lead to flexible connection pipe freezes,make the soft connection fail,then result in large errors.

( 3 ) The status is normal when the static calibration,but when using the error will change in no rule,mainly due to different system stress of two weighing.Even when using high-precision belt weigh scale,it also should pay attention.

( 4 ) When installing,there may be small gap between the sensor tip and base plate,then the weighing will be inaccurate when a foreign body enters.Mainly reflected in:When you increase the weight,the display value is small,but at this time the brightest voltage of sensor is normal,and it back to normal after cleaning the sensor.